EKF - Short Profile
EKF - Short Profile
SUE - SUJ • Isolated RS-232 & RS-485 Transceiver Modules

Front Connectors Micro-D - RJ45 - D-Sub


SUE-SUJ

Description

Ordering Information

Product Information

Block Diagram


SUI/SUJ • Isolated RS-232 & RS-485 • D-Sub Connector

Photo Gallery

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14
© EKF • Images show up in a secondary browser tab or window


SUE - SUJ

Isolated RS-232 & RS-485 Transceiver Modules



The SUE - SUJ series of isolated COM port transceiver modules are converters from an UART TTL-level interface to either RS-485 or RS-232 cable connection. The small modules are optionally available with Micro-D, RJ45, or D-Sub front connectors. All modules are equipped with a 2.0mm socket for either direct mounting to a suitable carrier card, or alternatively to be attached by means of a micro ribbon flat cable assembly.

With their dimensions of 59mm (length) and 20mm (width), up to four SUE - SUH modules (Micro-D, RJ45) fit into a 3U/4HP front panel. The SUI - SUJ modules are provided with a classic D-Sub connector, which requires 31mm front space. All modules were designed for highest data rates and optimum isolation and ESD characteristics. The industrial temperature range makes them suitable for rugged applications (e.g. IoT, edge computing).

SUE - SUJ


SUE - SUJ • Isolated Transceiver Modules


Feature Summary

General
  • Choice of isolated EIA/TIA asynchronous data interfaces
  • Transceiver modules available for RS-232 (SUE-RS232, SUG-RS232, SUI-RS232)
  • Transceiver modules available for RS-485 (SUF-RS485, SUH-RS485, SUJ-RS485)
  • Choice of front connectors
  • Transceiver modules available with Micro-D (SUE-RS232, SUF-RS485)
  • Transceiver modules available with RJ45 (SUG-RS232, SUH-RS485)
  • Transceiver modules available with D-Sub (SUI-RS232, SUJ-RS485)
  • 2.0mm pitch dual row TTL interface socket connector (RX, TX, CTS, RTS)
  • Direct mounting on a carrier card (mating pin header or socket w. pin stacker)
  • Alternate attachment via flat cable assembly
  • Two modules can be stacked on top of each other (back to back) using the same pin header
  • Two modules can be attached via single flat cable assembly
  • Power requirements +3.3V, maximum consumption 0.3W (RS-232), 1.0W (RS-485)
  • Dimensions 59mm x 20mm (SUE-SUH), 59mm x 31mm (SUI-SUJ)
  • CompactPCI® Serial carrier card for up to eight modules available (SU3-ENSEMBLE)
  • CompactPCI® Serial rear I/O carrier card for up to eight modules available (SUC-RIO)

RS-485 Transceiver Modules
  • Choice of three front panel connector types
  • SUJ-RS485 - Micro-D (20mm width module)
  • SUH-RS485 - RJ45 (20mm width module)
  • SUJ-RS485 - D-Sub 9-pos. (32mm width module)
  • 5kV rms isolation barrier RS-485/RS-422 transceivers (Analog Devices ADM2682)
  • Configurable as half- or full-duplex
  • ±15 kV ESD protection on RS-485 input/output pins
  • Transceiver data rate 16Mbps max.
  • Connect up to 256 nodes on one PartyLine bus (driver enable control via dedicated UART mode select outputs)
  • Open- and short-circuit, fail-safe receiver inputs
  • High common-mode transient immunity >25 kV/µs
  • Thermal shutdown protection
  • Suitable e.g. for industrial fieldbus applications

RS-232 Transceiver Modules
  • Choice of three front panel connector types
  • SUE-RS232 - Micro-D (20mm width module)
  • SUG-RS232 - RJ45 (20mm width module)
  • SUI-RS232 - D-Sub 9-pos. (32mm width module)
  • 2.5kV Isolation barrier RS-232 transceivers (Analog Devices isoPower ADM3252E)
  • Transceivers meet EIA/TIA-232-E specifications
  • High data rate up to 460kbps (each board tested @921.6kbps)
  • ±8kV/±15kV ESD protection on Transceiver input/output pins
  • High common-mode transient immunity >25 kV/µs
  • Suitable for high noise data communications and diagnostic ports

Front Panel I/O
  • Up to 4 transceiver modules RJ45 and/or Micro-D within 3U/4HP front panel width
  • Up to 8 transceiver modules RJ45 and/or Micro-D within 3U/8HP front panel width
  • Up to 6 transceiver modules D-Sub within 3U/8HP front panel width (flat cable attachment)
  • Up to 16 transceiver modules Micro-D within 3U/12HP front panel width
  • Custom specific front panel design
  • Suitable CompactPCI® Serial octal UART carrier card SU3-ENSEMBLE

Rear I/O
  • Up to 4 transceiver modules RJ45 and/or Micro-D within 3U/4HP back panel width
  • Up to 8 transceiver modules RJ45 and/or Micro-D within 3U/8HP back panel width
  • Up to 6 transceiver modules D-Sub within 3U/8HP back panel width (flat cable attachment)
  • Custom specific panel design
  • Suitable CompactPCI® Serial rear I/O carrier SUC-RIO (to be used together with SU3-ENSEMBLE)

Environment, Regulatory
  • Designed & manufactured in Germany
  • Certified quality management according to ISO 9001
  • Long term availability
  • Rugged solution (coating, sealing, underfilling on request)
  • RoHS compliant
  • Operation temperature -40°C to +85°C (industrial temperature range)
  • Storage temperature -40°C to +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • MTBF SUE-RS232 203.5 years
  • MTBF SUF-RS485 210.1 years
  • MTBF SUG-RS232 191.8 years
  • MTBF SUH-RS485 197.7 years
  • MTBF SUI-RS232 192.9 years
  • MTBF SUJ-RS485 197.7 years
  • EC Regulations EN55022, EN55035, EN60950-1 (UL60950-1/IEC60950-1)

SUE-SUJ - Simplified Block Diagram


SUE-SUJ - Simplified Block Diagram
Ordering Information
Please refer to List 21 for popular SKU